SOLVE COMMON MACARD N300 SETUP ISSUES WITH THESE TIPS

Solve Common Macard N300 Setup Issues with These Tips

Solve Common Macard N300 Setup Issues with These Tips

Blog Article

The Macard N300 WiFi extender can connect to your router both wirelessly and via a wired connection. However, if you're facing issues with the Macard WiFi extender setup, follow these troubleshooting tips to resolve the problem.

Fixes for Macard N300 Setup Issues

Several technical errors can arise during or after setting up your Macard N300 extender. To fix these issues, try the following solutions:

1. Use the WPS Button Correctly

If your router has a WPS button, use the WPS connection method to link the router with the extender. Follow these simple steps:


  • Plug the extender close to the router.

  • Press the WPS button on your router.

  • Press the WPS button on the Macard N300 extender.

  • The WPS LED will start blinking.


Wait for the connection to establish. Once connected, the WPS LED on the extender will turn solid.

After the connection is established, you can join the extended network using the router’s SSID and password.

2. Connect Your PC to the Extender Network
To access the Macard N300 setup page, you need to be connected to the extender’s WiFi network. Use either a wired Ethernet connection or connect wirelessly using the SSID details. Once connected, visit the setup page via the following:

  • URL: go.macard.online

  • IP Address: 192.168.10.1


3. Double Check the URL or IP for Login

The correct URL to access the Macard N300 setup page is go.macard.online. If this doesn’t work, use the default IP address 192.168.10.1 to reach the login page. Ensure you’re entering the correct URL or IP to avoid setup issues.

4. Use an Updated Web Browser

An outdated web browser may prevent the setup page from loading properly. To update your browser, follow these steps:

  • Open your browser.

  • Go to the browser’s Settings.

  • Click on the “About” option.


Look for the “Update” or “Check for Updates” button and click it to update your browser.

5. Reboot the Extender

Rebooting your extender can refresh its settings and resolve any connectivity issues. To reboot, simply disconnect the power supply and reconnect it after a few seconds.

6. Reset the Macard N300 Extender

If the above steps don't solve the issue, try resetting your Macard N300 extender. To reset, press the RESET button on the side panel of the extender using a paperclip or pin. After resetting, the extender will restart, and you can begin configuring it again.

How to Reconfigure the Macard N300 Extender After Reset
After resetting the extender, follow these steps to reconfigure it:

  • Connect your computer to the extender’s WiFi network.

  • Open your browser and go to go.macard.online or 192.168.10.1.

  • The setup login page will appear.

  • Enter the admin password, which can be found on the back of the extender.

  • Click LOGIN to access the setup interface.

  • Select your local router network to extend.

  • Set a new WiFi name (SSID) and password, then click SAVE.


Once the settings are applied, the extender will reboot, and you can connect to the new WiFi network.

Conclusion

By following these troubleshooting tips, you should be able to resolve any issues with the Macard N300 setup. If the issue persists, refer back to these steps or consult the user manual for further assistance.

Report this page